The knurled grips on those plugs were drawn with the 'helix guide', which is meant for drawing helices and spirals. It's good for drawing spiral staircases, rifled cannon barrels, twisted rope, worm gears, as well as screw and bolt threads too.ZigOtto wrote:the In line connector's crossed-curves mapping is amazingly neat !
lame lemec's drawings!
Re: lame lemec's drawings!
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
As much as I like my freehand line smoother, it's nice to have the extra control of a bezier guide, so I made one.
- Attachments
-
- Controller.jpg (43.62 KiB) Viewed 35602 times
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
Just yesterday, I created a bezier guide for my tablet driver hack - which means I can now get all the precision and control of a bezier line in a vector program into every brush stroke in a bitmap program.
So, here's the result of testing out that bezier guide for a hard circle brush. On the right is my reference (which I had to trace to get perfect linework for colouring later.) I think I'll soon modify my driver hack to make those same perfect helix spirals so I don't have to trace.
If you look really carefully, you can see that a drill bit is like two sharp chisels, twisted and forged together. Those sharp chisel-blades carve into the material while the spiral groove provides a space for the waste material to travel as the spinning chisels displace the shavings upwards.
It's really amazing when you consider how much thought goes into a well-designed drill bit, especially when it's made as a single moving part that is both mass-produced and practically disposable, costing only a few bucks to replace.
p.s. WACOM makes the best tablet hardware in the world but their software and drivers suck.
So, here's the result of testing out that bezier guide for a hard circle brush. On the right is my reference (which I had to trace to get perfect linework for colouring later.) I think I'll soon modify my driver hack to make those same perfect helix spirals so I don't have to trace.
If you look really carefully, you can see that a drill bit is like two sharp chisels, twisted and forged together. Those sharp chisel-blades carve into the material while the spiral groove provides a space for the waste material to travel as the spinning chisels displace the shavings upwards.
It's really amazing when you consider how much thought goes into a well-designed drill bit, especially when it's made as a single moving part that is both mass-produced and practically disposable, costing only a few bucks to replace.
p.s. WACOM makes the best tablet hardware in the world but their software and drivers suck.
- Attachments
-
- drillbit.jpg (42.16 KiB) Viewed 35565 times
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
A couple of things for my graphic novel project
- Attachments
-
- truck.jpg (33.97 KiB) Viewed 35508 times
-
- minecanal.jpg (86.36 KiB) Viewed 35509 times
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
A material painting test -- figuring out how I'd like character hair to appear
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
I'm sure that's not the truth : in fact you are going to ask for this haircut to your hairdresserlemec wrote:A material painting test -- figuring out how I'd like character hair to appear
Re: lame lemec's drawings!
hahaha or maybe these ones!Elodie wrote:I'm sure that's not the truth : in fact you are going to ask for this haircut to your hairdresserlemec wrote:A material painting test -- figuring out how I'd like character hair to appear
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
Sure, you should be really pretty
Spoiler : New Mark's Haircut :
Re: lame lemec's drawings!
- Attachments
-
- This is what is inside the little cardboard boxes
- vactube.jpg (18.75 KiB) Viewed 35291 times
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
My first painting from life in monochromatic light.
1 hour, pen brush.
1 hour, pen brush.
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
Here's some stuff that I made for gorilla artfare's artbook!
(Win7x64, TVP Pro 11 32-bit)
Re: lame lemec's drawings!
Wow, that's really great, congrats Mark ! =)
Re: lame lemec's drawings!
I most definitely agree with Elodie... Wow, wow and more wow! And I think I have written this numerous times about your work, but here it comes again - I absolutely love your use of light and colour, so inspiring - Excellent work! Thanks for sharing. : )
Kind regards,
Jesper Soelberg
http://jespersoelberg.blogspot.com/" onclick="window.open(this.href);return false;
Kind regards,
Jesper Soelberg
http://jespersoelberg.blogspot.com/" onclick="window.open(this.href);return false;